PRODUCT OVERVIEW
Moog introduces the Mercury Positioner, ideal for mobile and xed payloads up to 75 lbs. The new Mercury Positioner is
certied to hold payloads up to 50 lbs / mobile and 75 lbs / xed and withstands HMMWV shock and vibration standards,
making it ideal for applications in harsh environments and rugged terrain.
PRODUCT SPECIFICATIONS
Available Features
• Meets NEMA Type 4 and IP66 standards
• Extremely ruggedized, built to withstand extreme environments
• Networked IP control, 2/4 channel available
• Continuous 360° rotation
• Networked IP control
• Stabilized conguration available
• MIL-STD-810, Salt / Fog
• Enclosure IP66
• Payload Weight – Fixed 75 lbs
• Payload Weight – Mobile 50 lbs
• Choice of camera systems
• Easy integration with open source protocol
SPECIFICATIONS
Part
Number
Conguration
Load Mount/
Interface
Nominal
Voltage Vdc
Communication
Interface
Control
Protocol
Rotation Speeds* Rotation Range
Repeatability
Pan & Tilt
Pan Tilt Pan Tilt
7-35000-MWS ICMS CR (Mercury) Universal 24 Serial / IP PTCR-96 / Pelco D .005 - 100°/sec .005 - 100°/sec Continuous 180°(± 90°) 0.05°
ICM - Marine / Brush Motor, ICMS - Marine Sentry (Stepper), CR - Continuous Rotation, HS - High Speed
Serial: RS-232, RS-422, IP: Ethernet TCP/IP
* Maximum speed depends upon payload conguration
Pan & Tilt Positioners
www.moogS3.com
55
Mercury Series
Mercury Series
STANDARD PERFORMANCE
Load Capacity:
Mobile: 50 lbs balanced load • Fixed: 75 lbs balanced load
Operating Voltage Range:
18 – 32 Vdc
Operating Current:
1.25 amp (steady state); 4.2 amp (both axes moving)
Pan-Axis Range:
360° continuous rotation (slip ring)
Pan-Axis Speed:
0.05°/sec to 100°/sec
Tilt-Axis Range:
180° (±90°)
Tilt-Axis Speed:
0.05°/sec to 100°/sec
Internal Heater:
Thermostatically controlled (32° on / 35° off)
Operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Feedback:
Magnetic Encoders (0.01° readout)
Repeatability:
0.05°
Motor Type / Drive:
Stepper
Communication to Pan & Tilt:
IP and Serial (RS232 / 422 / 485)
Control Protocol:
Moog QuickSet PTCR-96 or Pelco D
Connector Specications:
25 Shell 43 Pin Base Connector
Load Connector Interfaces:
Mil-Spec 26-Soc, 16 Shell
Weight:
44 lbs base unit, 53 lbs with wings
Test Cable and Software:
6 ft. test cable
Power Supply:
Available upon request
IP66
T4
NEMA
CERTIFIED
Comments to this Manuals