Industrial Camera Systems – Protective Camera Enclosure
www.moogS3.com
PRODUCT OVERVIEW
The use of advanced solid-state CCD cameras in industrial plants are, in a number of cases,
unsuccessful because of the high ambient temperatures pre-vailing onsite. Although it is
possible to use a water-cooled protective housing for the camera, the installation work
necessary for the piping and the control unit is very extensive and costly.
For such applications, Moog has developed the WU-2152-EP industrial protective housing
for cameras which is suitable for use at temperatures of up to 70°C (158°F). In view of
the technique applied involving Peltier elements and fan, the internal temperatures in the
housing will not rise beyond a dened value, so that the CCTV camera installed therein will
not be damaged.
PRODUCT SPECIFICATIONS
Available Features
• Protection shield
• Lens protective tube
• Camera insertion beam
• Mounting plate with dovetail direction
105
WU-2152-EP
WU-2152-EP
CAMERA CONNECTION BOX KMF-853-0-PE4B FOR SERIES WU-2152-EP - SPECIFICATIONS
Power Requirement:
230Vac / 110Vac, 50 / 60Hz
Power Consumption, Total:
Appr. 82 / 40 W
Power Outputs:
5 / 12 / 16Vdc / 24Vac
Slots For Plug-In Boards Available:
2 x 16-Pin / 2 x 32-Pin
Dimensions:
Appr. 13” x 9” x 5” (330 x 230 x 115mm)
Protection Class:
IP66
PELTIER-COOLING SYSTEM
Power Requirement:
230Vac / 110Vac, 50/60 Hz
Power Consumption:
Appr. 66 / 32 W
Power Output For Peltier Unit:
12Vdc / 5A
Power Output For Radial Fan:
12Vdc / 0.33A
Airow Rate:
Appr. 40 m³/h
Peltier-Cooled Protective Housings
• 1-cable camera connecting plug
• Cooling ribs with peltier elements
• Thermostat-controlled radial fan
IP66
WES-42-70-E WUS-1700
Comments to this Manuals